China 3mm Stainless Steel Anchor Chain Marin Boat Link Chain bush roller chain

Item Description

Solution Description

  • Produced of Stainless Steel 316 
  • Corrosion Resistant Maritime Grade 
  • Includes Quality Bow Shackles
  • Superb for anchor rodes 
  • Chain Breaking Load 4000lbs Shackle Breaking Load 5500lbs

Detailed Photos

Product Parameters

 

Associated Products: Anchors & Shackles

Organization Profile

ZheJiang Slowfish Marine Goods & Equipment Co., Ltd has been a thorough producer for various maritime products. Following years of technological development, ZheJiang Slowfish Maritime has created a total industrial chain for maritime goods. Its primary merchandise protect from different variations and sizes of yacht, boat, kayak, canoe, large-responsibility boat anchor to multiple kinds of marine components like boat cleat, boat ladder, anchor chain and shackle.
With its headquarter found in ZheJiang , 1 of biggest intercontinental business hubs and ports, Slowfish has set up and built-in numerous factories all around China with a handful of generation lines for different items. 

Slowfish could layout and manufacture much more than 1 hundred varieties of marine merchandise this kind of as yacht, dinghy boat, inflatable kayak, boat outboard motor, outboard motor bracket, outboard propeller, boat anchor, anchor roller, anchor chain, steering wheel, boat ladder, boat buoy, boating paddle, SUP board, boat seat, couch & cabinet bed, anchor shackle, fishing rod holder, boat cleat, cup holder, handrail, folding shelf bracket, boat trumpet horn, boat dock line, boat bilge pump, and other marine products. 

Slowfish has constantly been committed to planning and production fragile items with exceptional high quality and elegance for its clients close to the entire world. With its worldwide model of Manifish, Slowfish marine products have received the hearts of consumers from United states of america, Canada, Australia, UAE, Europea, Latin America and Africa. 
Enjoy your water life with Slowfish Maritime Items!

Our Rewards

1. Innovation & Technologies
We are adopting the most successful, and environmentally pleasant technology to manufacture the very best maritime components for worldwide buyers. Our technological innovation tends to make our products endure.
2. Design & Manufacture
Always concentrate on the customer’s demand for reliable and quite marine merchandise. We design and manufacture products to satisfy today’s contemporary fashion, to equip customers’ boats with strong and fragile components. Which is the principle for all of our technicians. 
3. Quality & Productiveness
We have set a scientific process for product’s design and style, manufacture and test to guarantee all products are of good quality and beauty. With skilled technicians and effective devices, we are CZPT to generate in a massive scale to satisfy the demand from customers of wholesale companions.
four. Trustable Services
Our provider starts off from your enquiries, and very last to your ultimate pleasure. We would support you settle each and every element of your demand from customers, choose your most favorable items and set up most efficient cargo and manage all other methods until the solution suits your boat nicely.

FAQ

Q1. When will you deliver the goods following the order is placed?
Answer: Many of our products are offered in inventory, and we would prepare for supply as before long as the order details are confirmed.

Q2. Can you aid arrange for shipping if in big amount?
Solution: Yes, we would provide one-stop provider for all consumers like production, package deal, delivery and after-product sales support. We could offer most efficient shipping provider as required.

Q3. How can I pay the purchase ?
Response: We have a number of payment equipment obtainable to customers, remember to affirm with our salesman ahead of your payment to guarantee the payment is protected and successful.

Q4. Can you customise my goods?
Answer: Sure, we have factories and could design and style and manufacture products with certain requirement. Remember to do not hesitate to make contact with us and tell us your desire.

We are dedicated to offering the ideal items and services to buyers all around the globe. We would attempt our greatest to fix any of your worry on our products and companies.

US $0.99-1.99
/ Meter
|
1 Meter

(Min. Order)

###

After-sales Service: One Year
Warranty: 12 Months
Material: Stainless Steel
Certification: CS
Design: Anchor Chain
Weight (Kg): <1000kg

###

Samples:
US$ 1.30/Meter
1 Meter(Min.Order)

|
Request Sample

US $0.99-1.99
/ Meter
|
1 Meter

(Min. Order)

###

After-sales Service: One Year
Warranty: 12 Months
Material: Stainless Steel
Certification: CS
Design: Anchor Chain
Weight (Kg): <1000kg

###

Samples:
US$ 1.30/Meter
1 Meter(Min.Order)

|
Request Sample

Roller Chain Basics

Before choosing the right roller chain for your machine, it is necessary to learn some basics. Learn about sprockets, tensile strength, pitch, and width. Read this article to learn more. It will help you make an informed decision. Getting the right product is critical, but it’s not always as simple as choosing a brand name. You need to choose a company that supports its products and provides good service.
chain

Roller sprocket

If you are planning to purchase roller sprockets for your application, you should first look at the various types available. Sprockets available for single-strand roller chains are manufactured by Boston Steel – Type B sprockets are drilled to size. They are available in 1/4, 3/8, 1/2, 5/8, 3/4 and 1″ pitch sizes.
The diameter of the sprocket is important when choosing the right sprocket for your application. Using a caliper to measure the diameter of a toothless plate is a good way to determine the exact size of the sprocket. A caliper is the diameter of a plate without teeth. On Type B and C sprockets, the hub diameter measures the thickness of the hub.
Another type of sprocket is the steel split sprocket, which is split in diameter. This type is easy to install and remove, and is held together by bolts in the hub. Typically, split sprockets have chain pitches ranging from 40 to 240 and bores ranging from 3/4″ to 6″. The split sprockets are designed with one pointing towards the ceiling and the other two parallel to the floor.
When shopping for sprockets, it is important to remember that they are designed specifically for a specific chain. All chains are manufactured to specific standards. In the United States, the most common standard is ANSI. The chain pitch is the distance between the center of each pin and the center of the next pin. In the US, the standard is always measured in eight-inch intervals.
In addition to sprocket size, sprocket pitch and the surface area also affect chain life. Unlike belt sprockets, which are made of forged steel, the teeth on roller sprockets are stamped from steel sheet or pressed from powdered metal. The harder the teeth, the longer the chain will last.

Roller chain pitch

The pitch of a roller chain is the distance between the sprocket and the pin. The smaller the thread pitch, the smaller the bushing wear. Generally speaking, the smaller the pitch, the longer the life of the chain. For best performance and longest life, manufacturers recommend a minimum chain pitch of 2% to 3%. Chain pitch is important to ensure proper performance, and the manufacturer recommends that you replace the chain when it reaches 2% to 3% of normal.
To determine the correct chain pitch for a particular chain, first determine the sprocket size and pitch. Pitch is the distance between pin centers, measured in 1/8 inch increments. The pin diameter of the chain is also important. If you’re not sure about the pin diameter of your chain, measure a few links to get a good average reading. Alternatively, use a caliper to measure the inside diameter of the sprocket and count the number of teeth.
When sizing a sprocket, measure the chain between the gears with a caliper and compare it to the measurements on the chain size chart. Make sure you have checked all the specs and checked the correct chain pitch. Then, choose the correct chain pitch for your needs. This is a critical step in choosing the right chain. So get the correct pitch for your roller chain. Correct pitch helps ensure maximum performance and safety.
To identify a specific type of roller chain, measure its tensile strength. This represents the amount of load the chain can withstand before breaking. Another key parameter to consider is fatigue strength. Chains with high fatigue strength are more resistant to rust and wear than chains with low fatigue strength. The numbers on the right in the standard numbering represent normal or light duty chains, while the numbers on the left represent the pitch of heavy-duty chains.
Double pitch roller chains are a variant of single pitch chains. They are manufactured according to ISO 606 and meet the same standards as single pitch chains. They are mainly used in applications with lower requirements for speed and power transmission. The plates of double pitch roller chains are also longer than single pitch chains. The double pitch drive series is also used for elevator and long conveyor drives. There are three main types of roller chains: single-pitch chains, double-pitch carriers, and oversized rollers.

Roller chain width

When buying a roller chain, one of the first decisions you must make is its width. To make this determination, you need to measure the overall width of the chain, the diameter, and the width of each roller. You must also know the height and thickness of the board. After taking these measurements, you can start shopping for the perfect roller chain. But before you buy a new chain, it’s important to know what to expect from the chain itself.
There are many different types of roller chains. These chains are available for ANSI and metric measurements. They come in single-stranded and double-stranded variants. They are usually used for power transmission. Other types include agricultural, automotive, conveyor, multi-strand, and four-strand chains. These charts also include a chart so you can easily see the exact size you need. Listed below are some of the benefits of buying a roller chain.
Roller diameter and pin diameter are important factors in choosing the correct chain width. The width of the chain is the nearest binary fraction of 5/8 of an inch. It should be at least half the thickness of the sprocket, and the plate thickness is one-eighth the width of the chain. Overweight chains are indicated with the suffix H. The pitch and width of the chain are determined by the working load and machine speed.
The outer links of the roller chain are called pin links. These pins are inserted into the bushings of the adjacent roller links. They are held in place by cotter pins. Pin links are usually pressed into the pins of heavy-duty chains. These pins are used to hold the rollers in place. However, these pin chains can reduce the power rating of roller chains by up to 20%.
The ANSI 29.1 Steel Chain Specification specifies a minimum pitch in inches and ultimate strength of 12,500 x pitch in inches. At the same time, the O-ring chain greatly reduces wear due to its lubricating effect. O-ring and X-ring chains contain a lubricant injected by vacuum when riveting the chain together. Transmission chains are tested and governed by standards bodies such as ANSI. In 2011, the American Society of Mechanical Engineers developed a standard for precision power transmission chains.
chain

Roller chain tensile strength

One of the most important indicators of roller chain strength is tensile strength. This measurement refers to the amount of load the chain can withstand before breaking. Another measure, called fatigue strength, refers to the maximum load a chain can withstand before it breaks. The strength of a roller chain depends on its size, the quality of the steel used in its construction, and the heat treatment. There are also differences in the types of shot peening used to treat steel, pitch holes, and link plates.
When choosing a roller chain, the workload is critical. This is the maximum load the chain can withstand before fatigue failure occurs. This measurement is critical because it helps determine the type of load applied to the chain. When deciding which roller chain to buy, be sure to consider the mechanical type and desired strength. Then, make sure it meets strength and load-carrying capacity requirements.
The ultimate tensile strength of a roller chain is based on the manufacturer’s recommended maximum tensile strength. However, the actual tensile strength may be higher or lower than this value. The working load limit of a roller chain can also be calculated by multiplying the chain diameter by the grade. The working load limit of a chain is the highest tension it can withstand before breaking. This value is usually expressed in points.
The maximum tensile strength of roller chains varies by chain type. The single-strand heavy chain has thick side plates for higher shock loads. Single strand heavy-duty roller chains, also known as “bushing” roller chains, are also available. Double-stranded heavy chains are structurally similar, but they have two layers of steel connected by pins that are nearly twice as strong as standard roller chains.
The tensile strength of a single-strand roller chain is approximately 500 tons. In comparison, a single-chain blockchain has a tensile strength of 900. The tensile strength of the two is similar, and it is not recommended to choose one or the other. Although steel and titanium chains are considered the strongest materials for roller chains, these materials are not magnetic.

China 3mm Stainless Steel Anchor Chain Marin Boat Link Chain     bush roller chainChina 3mm Stainless Steel Anchor Chain Marin Boat Link Chain     bush roller chain
editor by czh 2023-01-27

Recent Posts